
Corner element in the wind tunnel.
Wind Noise generated by Façade Elements can partly reach such a high sound level that the well-being of the people inside the building and outside in the immediate vicinity can be affected.
more infoCorner element in the wind tunnel.
Wind Noise generated by Façade Elements can partly reach such a high sound level that the well-being of the people inside the building and outside in the immediate vicinity can be affected.
more infoHighlights from research and development
Measurement of the sound power of an air purifier in Fraunhofer IBP’s reverberation chamber for characterizing acoustics.
Our projects entitled “Clean Air Acoustics”, “AC/DC”, and “Healthy Air Initiative” focus on finding ways to purify air in rooms while keeping noise levels low.
more infoMicro-perforated rim as sound absorber.
The solution presented here follows the approach to integrate a robust, purely metallic resonator with micro-perforation in the rim.
more infoWAMS: Heat pumps - Acoustics and multi-source systems.
Electrically driven heat pumps and air conditioning systems are future-oriented technologies of the energy transition. For widespread use in multi-family houses or office buildings, a new generation of devices is required.
more infoTaking into consideration temperature, moisture, corrosivity and time as elements, transient predition models for reinforcing corrosion will be developed in this project.
In this project, the durability of concrete with and without chloride-containing recycled aggregate will be investigated.
more infoHighlights from research and development
Visualization of the Bürgerhospital district in Stuttgart.
Already today, Fraunhofer IBP is developing energy concepts that address the goal of greenhouse gas neutrality.
more infoHighlights from research and development
Air sampler with gelatin filter positioned directly below one of the two indoor air purifiers.
Mobile indoor air purifiers remove infectious aerosols from the air or deactivate the pathogens contained within.
more infoHighlights from research and development
Determining the degree of disaggregation of the extracted aggregates by treatment with organic acid.
Our scientists are conducting research on electrodynamic fragmentation (EDF) with a view to recycling inorganic composite materials.
more infoHighlights from research and development
Cool coatings prevent surfaces from heating up excessively.
At a school in Kochi, local regional partners and researchers from various Fraunhofer Institutes are testing technologies for adapting to the changing climate.
more infoHighlights from research and development
Cement from old concrete - potential for binding CO2 sustainably.
Fraunhofer IBP is helping to identify the potential of concrete and to exploit it accordingly.
more infoCalculation of indoor lighting conditions.
The aim of the DIAL project was to improve lighting and energy-related façade planning by providing suitable planning tools.
more infoThe "showcase" entrance side of the Efficiency House Plus in Berlin.
The Federal Ministry for Housing, Urban Development and Building has launched the successor to the Plus Energy House: Efficiency House Plus with Electric Mobility.
more infoLogo “BRITA in PuBs”.
The project aimed to raise the market share of renovation measures with a view to increasing energy efficiency and promoting the use of renewable energy.
more infoLogo “Annex 46 - EnERGo”.
The main outcome of the project is the “IT Toolkit for Energy Efficient Retrofit Measures”, a collection of software support tools.
more infoBien Zenker house - show home in Cologne.
The Fraunhofer Institute for Building Physics IBP records and evaluates information such as key consumption data on heating energy, domestic hot water energy and electricity.
more infoCalorimetric facade and roof test stand of the Fraunhofer Institute for Building Physics IBP near Holzkirchen.
The research project received funding from the International Energy Agency (IEA) in the scope of EBC Annex 58. The project aims at advancing existing procedures for in-situ measurements (mainly for transparent building components). Another goal is the definition of appropriate methods for data analysis and error estimation.
more infoMultisensory experience - augmented reality coupled with virtual reality.
VR MultiSense, immersive experiences for resilient decisions in the construction process lead to cost reduction by involving all parties involved.
more infoAerial view of the experimental estate "Living Lab" at FertighausWelt Wuppertal (Germany).
The aim of the project is the practical and theoretical investigation of central storage facilities ('estate electricity storage') for surplus regenerative (PV) energy.
more infoOverview map of all model projects of the "Efficiency House Plus" network.
Based on the Berlin pilot project the evaluation and dissemination of the "Efficiency House Plus standard" was set as a goal.
more infoSEM image of a specimen with a Sol-Gel coating.
Researchers at Fraunhofer IBP are assessing the long-term effectiveness of antimicrobial finishes applied to surfaces.
more infoSouthwest view of the Höhenkirchen day care centre.
The Höhenkirchen-Siegertsbrunn community wanted to build a children's daycare center that is particularly sustainable and generates more energy than it consumes.
more infoThe entire complex of the Kunsthalle Mannheim (status 2015).
Fraunhofer IBP has developed an integral concept to improve Kunsthalle Mannheim’s energy efficiency.
more infoStart interface of the interactive “Lighting Retrofit Adviser” sourcebook.
IEA SHC Task 50 is a subproject of the joint project "Energetic and ergonomic optimization of new lighting systems for refurbishment and new construction".
more infoHeat loads in business jet avionics.
The aim of this project is the establishment of a simulation chain for aircraft cabin environments.
more infoCargo area of the aircraft demonstrator in the Fraunhofer Flight Laboratory.
New, environmentally-friendly fire extinguishing agents are being tested in the cargo area of the Flight Test Facility.
more infoSubject in the aircraft cabin.
Subject tests in the Flight Test Facility determine the influence of air quality in the aircraft cabin on performance and well-being.
more infoView of the business jet cabin.
In the business jet mock-up at Fraunhofer IBP's flight laboratory - the Flight Test Facility - studies on cabin comfort and comfort measurements are carried out.
more infoParticle foam insulation installed in the LITE chamber.
Comparison of the hygrothermal behavior of particle foam insulation with conventional glass wool insulation.
more infoHighlights of research and development
Thermal and acoustic comfort in the galley/door area of an aircraft.
The joint project "Energy-efficient cabin systems and interior (KASI)" is concerned with thermal and acoustic comfort in the galley/door area of an aircraft.
more info